Dwyer 2300-60PA Series 2000 Magnehelic Differential Pressure Gauge
Description Of Differential Pressure Gauge
Select the Magnehelic gage for high accuracy--guaranteed within 2%
of full scale--and for the wide choice of 81 models available to
suit your needs precisely. Using Dwyer simple, frictionless
Magnehelic gage movement, it quickly indicates low air or
non-corrosive gas pressures--either positive, negative (vacuum) or
differential. The design resists shock, vibration and
over-pressures. No manometer fluid to evaporate, freeze or cause
toxic or leveling problems. It's inexpensive, too. The Magnehelic
gage is the industry standard to measure fan and blower pressures,
filter resistance, air velocity, furnace draft, pressure drop
across orifice plates, liquid levels with bubbler systems and
pressures in fluid amplifier or fluidic systems. It also checks
gas-air ratio controls and automatic valves, and monitors blood and
respiratory pressures in medical care equipment.
Bezel provides flange for flush mounting in panel. Clear plastic
face is highly resistant to breakage. Provides undistorted viewing
of pointer and scale.
specifications Of Differential Pressure Gauge
| Product name | Differential Pressure Gauge |
| Service | Air and non-combustible, compatible gases |
| Enclosure Rating | IP67 |
| Max Pressure | 0.1(Mpa) |
| Connection | 1/4NPT |
| Warranty | 1 year |
| Customized support | OEM, ODM |
| Pressure Rating | 15 PSI (1.03 bar) |
Photo details Of Differential Pressure Gauge
⅛" emale NPT duplicate high and low pressure taps - one pair side
and one pair back
Relief plug opens at approximately 25 psig (1.72 bar), standard
gages only
Indicate Positive, Negative or Differential, Accurate within 2%
with the Dwyer 2300-60PA.
Differential pressure gauge, range 30-0-30 Pa, minor divisions 2.0,
calibrated for vertical scale position.
Air and non-combustible, compatible gases
May be used with hydrogen
Pressures must be less than 35 psi
Die cast aluminum case and bezel, with acrylic cover
Exterior finish is coated gray to withstand 168 hour salt spray
corrosion test
±2% (-HA model ±1) of FS (±3% (-HA ±1.5%) on -0, -100 PA, -125 PA,
-10 MM
±4% (-HA ±2%) on -00, -60PA, -6MM ranges), throughout range at 70°F
(21.1°C)
