Product series
Harmony Safety Automation
Product type
Safety module
Security module name
XPSUAF
Security module application
Monitoring antivalent contacts
For emergency stop, guard and light curtain monitoring
Module function
Emergency stop button with 2 NC contacts
The protection monitor uses 1 or 2 limit switches
Monitoring 2 PNP sensors
Magnetic switch monitoring
Light screen monitoring
RFID switch
Monitoring electrosensitive protection Equipment (ESPE)
Proximity sensor monitoring
Safety level
Can achieve PL e/ 4 class in compliance with ISO 13849-1
Can achieve SILCL 3 in accordance with IEC 62061
SIL 3 can be achieved in compliance with IEC 61508
Safe and reliable data
MTTFd > 30 years comply with ISO 13849-1
Dcavg >= 99% in accordance with ISO 13849-1
PFHd = 1.13E-09 in accordance with ISO 13849-1
HFT = 1 complies with IEC 62061
PFHd = 1.13E-09 in accordance with IEC 62061
SFF > 99% comply with IEC 62061
HFT = 1 complies with IEC 61508-1
PFHd = 1.13E-09 in accordance with IEC 61508-1
SFF > 99% in accordance with IEC 61508-1
Type = B conforms to IEC 61508-1
Type of electrical circuit
NC pair
PNP pair
Antivalent pair
OSSD pair
Wiring capacity
Detachable screw terminal, 0.2... 2.5mm ² Hard or soft
Detachable screw terminal, 0.25... 2.5mm ² flexible single conductor with wire hoop
Detachable screw terminal, 0.2... 1.5mm ² Hard or soft double wire
Detachable screw Terminal, 2 x 0.25... 1 mm² Flexible wire with wire hoop without cable end, with bezel
Detachable screw terminal, 2 x 0.5... 1.5mm ² Flexible wire with wire hoop with cable end, with frame
Rated supply voltage [Us]
24 V AC - 15... 10%
24 V DC-20... 20%
Supplementary information
Synchronize time between two inputs
0.5s
2 s
4 s
Startup type
Automatic/manual/monitored
Power consumption [W]
2.0 W 24 V DC
Power consumption VA
5.0 VA 24 V AC 50/60 Hz
Input protection type
Internal, electron
safety outputs
3 NO
safety inputs
2
Maximum line resistance
500 Ω
Input compatibility
Normally closed circuit complies with ISO 14119
The XC limit switch complies with ISO 14119
Mechanical contacts comply with ISO 14119
Normally closed circuit complies with ISO 13850
The Antivalent pair conforms to ISO 14119
OSSD pair complies with IEC 61496-1-2
3-wire proximity sensor PNP
Rated working current
5 A AC-1
3 A AC-15
5 A DC-1
3 A DC-13
control outputs
3 pulsed output
Input/output type
Semiconductor pulsed diagnostic output Z1, 20 mA
Conventional heating current
8 A
A fuse for use with a relay
10 A gG NO relay output circuit in accordance with IEC 60947-1
Minimum output current
10 mA for relay output
Minimum output voltage
15 V for relay output
Maximum response time on input open
20 ms
Rated insulation voltage
250 V (pollution level 2) in accordance with EN/IEC 60947-1
Rated impulse withstand voltage [Uimp]
4 kV overvoltage Class II conforms to EN/IEC 60947-1
Local signal indication
LED indicator (green) Power on:
LED indicator (red) error:
LED indicator (yellow) Starting:
LED indicator light (yellow)safety status:
LED indicator light (yellow)safety input S12:
LED indicator light (yellow)safety input S22:
Installation mode
35 mm DIN guide rail
depth
120 mm
height
100 mm
width
22.5mm
Net product weight
0.200kg
